To clean an asphalt driveway safely, start by sweeping away loose debris, treat oil and other stains with an asphalt-safe cleaner, gently scrub problem areas, and rinse thoroughly. Avoid harsh solvents, aggressive pressure washing, and chemicals that can soften or deteriorate asphalt. Regular cleaning also makes cracks, drainage problems, and other early signs of pavement damage easier to spot.
Your Driveway Probably Needs Cleaning for More Than Looks
Most homeowners clean their driveway when it starts looking dirty.
That makes sense. A cleaner driveway can instantly make the front of a home look better.
But there is another reason to keep asphalt clean: dirt can hide problems.
A layer of leaves can conceal a developing crack. A dark oil spot can disguise surface deterioration. Soil accumulating along an edge can prevent water from draining properly.
Cleaning gives you a chance to see what is actually happening to the pavement.
For homeowners throughout Georgetown and Sussex County, Delaware, that’s especially useful after periods of heavy rain, summer storms, falling leaves, and winter weather.
So grab the broom, but before you reach for the strongest cleaner or pressure washer you own, there are a few things worth knowing.
First Rule: Asphalt Isn’t Concrete
This is where many driveway-cleaning mistakes begin.
Concrete and asphalt may both feel hard under your feet, but they are very different materials.
Asphalt contains a petroleum-based binder that holds the aggregate together. Certain solvents, petroleum products, and overly aggressive cleaning methods can deteriorate that binder.
In other words:
The strongest cleaner isn’t necessarily the best cleaner.
The goal should be to remove contamination while being gentle enough to protect the pavement underneath.
What You’ll Need
You don’t need an arsenal of specialized equipment.
For routine cleaning, gather:
- A stiff outdoor broom
- Garden hose
- Bucket
- Asphalt-safe degreaser or detergent
- Stiff nylon brush
- Absorbent material for fresh spills
- Gloves and eye protection
For large residential driveways, a pressure washer may be useful, but technique matters, which we’ll cover later.
Step 1: Sweep Before Adding Water
Don’t immediately hose everything down.
Start with a completely dry driveway and sweep it thoroughly.
Remove:
- Leaves
- Grass clippings
- Gravel
- Mulch
- Dirt
- Twigs
- Loose weeds
Pay particular attention to pavement edges and areas where the driveway meets sidewalks, garages, or drainage channels.
Why sweep first?
Once dirt gets wet, it becomes mud and becomes considerably harder to remove.
There’s another benefit: once the surface is clear, you’ll be able to spot cracks and damaged areas that were previously hidden.
If cleaning reveals deteriorated sections, potholes, or deeper cracking, professional asphalt repair and patching can address the damage before it spreads.
Step 2: Deal With Fresh Oil Spills Immediately
That little dark spot beneath the car shouldn’t wait until your annual driveway cleaning.
Fresh oil is considerably easier to manage than a stain that has been sitting for months.
If you notice a spill:
- Don’t scrub it immediately.
- Cover it with an absorbent material.
- Allow the material to absorb as much liquid as possible.
- Sweep it up.
- Treat the remaining residue with an asphalt-compatible cleaner.
Avoid using gasoline or other petroleum solvents to dissolve the stain. They can soften the asphalt binder and potentially make the pavement damage worse than the original stain.
Step 3: Pre-Treat Old Oil and Grease Stains
Older stains need more patience.
Apply an asphalt-safe degreaser according to its instructions and give it time to work before scrubbing.
Use a stiff nylon brush rather than a sharp metal brush.
Work the cleaner into the stained area using moderate pressure, then rinse.
One treatment may not completely remove a deeply absorbed stain. That’s okay.
Repeated gentle treatments are generally a better approach than attacking the pavement with extremely harsh chemicals.
Step 4: Wash the Entire Driveway
Once individual stains have been treated, clean the overall surface.
Work from the highest point of the driveway toward the lowest point so dirty water naturally moves away from areas you’ve already cleaned.
A simple mixture of water and a mild, asphalt-compatible cleaner may be sufficient for:
- Dust
- General grime
- Mud
- Organic buildup
- Light vehicle residue
Scrub particularly dirty sections before rinsing everything thoroughly.
Step 5: Be Careful With Pressure Washing
Yes, asphalt can be pressure washed.
No, that doesn’t mean maximum pressure is a good idea.
Holding a powerful nozzle extremely close to aging pavement can loosen aggregate or damage already weakened areas.
Use a wider spray pattern, maintain reasonable distance from the surface, and test an inconspicuous area first.
Older, cracked, or deteriorating asphalt deserves extra caution.
If the driveway already appears fragile, cleaning by hand may be safer until its condition has been professionally assessed.
Step 6: Remove Moss, Algae, and Organic Growth
Shaded driveways can develop green or dark organic growth, particularly in damp areas.
This isn’t merely cosmetic.
Organic buildup can hold moisture against the pavement and may also make the surface slippery.
Begin with gentle mechanical removal using a stiff brush and an asphalt-compatible cleaning solution.
Then investigate why the area stays damp.
Possible causes include:
- Heavy shade
- Poor drainage
- Sprinkler overspray
- Downspouts discharging nearby
- Low spots in the pavement
Cleaning the growth without correcting the moisture source means you’ll probably be cleaning it again.
Step 7: Don’t Forget the Edges
Driveway edges are easy to overlook.
Grass, soil, and weeds gradually creep onto the pavement and trap moisture along the perimeter.
Trim vegetation and carefully remove accumulated soil.
You should be able to clearly see where the asphalt ends.
Avoid aggressively pulling large rooted plants from cracks because this can sometimes remove already-loose pavement with the root.
If vegetation keeps returning from the same crack, the crack itself may need attention.
Step 8: Inspect the Driveway While It’s Clean
This may be the most valuable part of the entire job.
Once the driveway has dried, walk it slowly.
Look for:
- Hairline cracks
- Widening cracks
- Loose aggregate
- Depressions
- Potholes
- Crumbling edges
- Areas where water collects
Small defects are much easier, and generally less expensive, to address than advanced pavement failure.
The Federal Highway Administration’s pavement preservation resources emphasize the value of preventive maintenance in keeping pavement performing effectively over its service life.
What About Those Little Cracks You Just Discovered?
Don’t simply cover them with dirt and forget they exist.
Cracks provide a pathway for water.
Once moisture moves below the surface, it can contribute to deterioration of the underlying pavement structure.
That’s why cleaning and inspection work so well together.
If you uncover cracks or localized damage, having them evaluated early through asphalt repair and patching services may prevent a relatively small issue from becoming a much larger one.
Should You Sealcoat After Cleaning?
Cleaning and sealcoating serve different purposes.
Cleaning removes contamination.
Sealcoating adds a protective surface treatment to suitable asphalt pavement.
If your driveway is faded, weathered, or due for maintenance, cleaning may be the first step before considering professional asphalt sealcoating.
However, sealcoat should not be used to hide serious structural damage.
Cracks, potholes, and failed pavement should be addressed appropriately first.
The National Asphalt Pavement Association provides additional educational resources on asphalt pavement and its long-term performance.
Cleaning Mistakes That Can Shorten Your Driveway’s Life
Sometimes the damage isn’t caused by neglect.
It’s caused by enthusiastic cleaning.
Avoid these common mistakes:
Using gasoline as a cleaner
Gasoline and other petroleum solvents can attack the asphalt binder.
Using extremely aggressive pressure
More pressure does not automatically mean a cleaner driveway.
Ignoring oil leaks
Cleaning the same stain every month isn’t a maintenance strategy. Fix the vehicle leak when possible.
Letting dirty runoff drain anywhere
Be mindful of where cleaning water and chemicals travel.
Sealcoating over damage
A darker surface doesn’t mean the underlying pavement has been repaired.
Waiting years between inspections
Your driveway doesn’t need to be professionally inspected every time you sweep it, but homeowners should periodically look for changing conditions.
What Should You Do With Driveway Cleaning Runoff?
This part often gets ignored.
Driveway wash water can contain:
- Oil
- Grease
- Sediment
- Cleaning chemicals
- Vehicle residue
You don’t want that material flowing directly into storm drains or nearby waterways.
The U.S. Environmental Protection Agency’s stormwater resources explain how pollutants carried by runoff can ultimately enter local waterways.
Use cleaning products according to their labels and follow applicable local requirements for managing contaminated wash water.
A Simple Delaware Driveway Cleaning Schedule
You don’t need to deep-clean your driveway every weekend.
A practical routine is more useful.
Spring
Sweep away winter debris and inspect for weather-related cracking.
Summer
Clean vehicle stains promptly and watch for pavement fading or surface wear.
Fall
Remove leaves regularly so wet organic material doesn’t remain on the pavement.
Winter
Keep drainage paths clear and avoid damaging the surface when removing snow or ice.
For Delaware property owners, it’s also smart to inspect pavement after unusually heavy storms.
When Cleaning Isn’t Enough
Sometimes what looks like a dirty driveway is actually a deteriorating driveway.
Call a paving professional when you see:
- Numerous cracks
- Recurring potholes
- Significant crumbling
- Large depressions
- Drainage problems
- Loose surface material
- Extensive deterioration
At that point, another bottle of cleaner isn’t going to solve the problem.
Professional asphalt paving and maintenance services can help determine whether repair, maintenance, resurfacing, or another solution makes sense.
A 10-Minute Post-Cleaning Check
Before putting everything away, ask:
✔ Does water drain away properly?
✔ Did I uncover any new cracks?
✔ Are the edges still supported?
✔ Are there oil stains that keep returning?
✔ Is any section sinking?
✔ Are there areas where water consistently collects?
✔ Is the asphalt noticeably gray or weathered?
That ten-minute inspection may be more valuable than the cleaning itself.
Frequently Asked Questions
What is the best way to clean an asphalt driveway?
Start by sweeping loose debris, pre-treat stains with an asphalt-compatible cleaner, scrub dirty areas with a stiff nylon brush, and rinse thoroughly. Avoid harsh petroleum solvents and unnecessarily aggressive pressure washing.
Can I pressure wash an asphalt driveway?
Yes, but use caution. Excessive pressure or holding the nozzle too close can damage older or weakened asphalt. Use a wider spray pattern and test a small area first.
How do I remove oil stains from asphalt?
Absorb fresh oil first, then use an asphalt-safe degreaser and a stiff nylon brush. Older stains may require multiple treatments.
How often should I clean my asphalt driveway?
Light sweeping can be performed whenever debris accumulates. A more thorough cleaning once or twice a year is reasonable for many homes, with immediate spot cleaning for oil or chemical spills.
Should I sealcoat immediately after cleaning?
Not automatically. First inspect the pavement for cracks and other damage. If sealcoating is appropriate, the asphalt should be properly prepared and sufficiently dry before application.
A Clean Driveway Makes Problems Easier to See
There’s nothing wrong with wanting a driveway that looks good.
But the bigger benefit of cleaning is visibility.
Once the dirt, leaves, oil, and buildup are gone, your asphalt tells you much more about its condition.
You can see the crack beginning near the garage.
You can spot the low area that holds water after every storm.
You can notice an edge beginning to crumble before a large section fails.
That’s what makes driveway cleaning part of smart asphalt maintenance rather than simply another outdoor chore.
For homeowners and property owners in Georgetown, Sussex County, and surrounding Delaware communities, Isaacs Asphalt Paving can help when routine cleaning reveals problems that require professional asphalt repair, sealcoating, or paving.
A broom can uncover the problem.
Knowing what to do next is what protects the driveway.


